FAQ

A: Singabavelisi kwaye sigxile ekuveliseni umgangatho olungileyo we-MCCB. Le fektri inembali engaphezu kweminyaka engama-20 kwaye ibisenza ii-circuit breakers. Yadluliselwa ukusuka kuyise womphathi ukuya kunyana wakhe, ngoko ke le fektri yasekwa ngo-2015, ekwalixesha lokuqala komphathi wethu wangoku ukuqala yonke imisebenzi. Ngoko ke amava omsebenzi kunye nenqanaba lobungcali ziifektri zokuvelisa ze-ODM zasekhaya ezaziwayo.

A: Ngokwesiqhelo iintsuku ezi-5-10 ukuba kukho iimpahla ezikhoyo esitokhweni. Okanye kuya kuthatha iintsuku ezili-15-20. Kwizinto ezenziwe ngokwezifiso, ixesha lokuhambisa lixhomekeke.

A: 30% T/T kwangaphambili, kunye nebhalansi ngaphambi kokuthunyelwa.

A: Ewe. Singabonelela ngeemveliso ezenzelwe wena kunye neendlela zokupakisha ezinokwenziwa ngokweemfuno zomthengi.

A: Sele sineminyaka senza izinto ezininzi zokubumba kubathengi abahlukeneyo. Singanikezela nge-DMC Thermosetting Compression molding. I-Thermoplastic injection molding, i-Metal stamping molding.

A: Ukuba umonakalo awubangelwanga zizinto zabantu, iwaranti yinyanga ezisi-8. Ukuba kukho ezinye iimfuno ezikhethekileyo, umthengi angazinyusa. Singathethathethana ngazo ngaphambi kokuba senze iodolo.

A: Singavelisa ii-pcs ezingama-3000 lamawaka ngenyanga.

A: zonke iindawo zeMCCB yethu zenziwe sithi. Sineworkshop yokustampa, iworkshop yokuwelda kwindawo ethile, iworkshop yokucinezela, iworkshop yokuhlanganisa, iworkshop yokwenza izinto ngokuzenzekelayo, singenza iiMetal Stamping Moldings, iiDMC Moldings kunye neeThermal Plastic Moldings.

A: Sinohlolo oluzayo lwezinto ezikrwada kunye nohlolo lwenkqubo ye-rivet kunye ne-stamping. Kukwakho nohlolo lokugqibela lwezibalo oluquka ukulinganiswa kobukhulu, uvavanyo lokuxinana kunye novavanyo lwe-coat.

A: Inkampani yethu inengeniso yonyaka yentengiso ye-250 yezigidi zeerandi kwaye ibisoloko ibandakanyeka kwi-ODM kunye ne-OEM kubathengi basekhaya. Emva koko, siqale ukwenza urhwebo lwangaphandle ekuqaleni kuka-2023. Abathengi bethu basekhaya bathatha iimveliso zethu bazithengise kubathengi bangaphandle, ngokuyintloko eYurophu nakuMbindi Mpuma.

A: Okokuqala, ndingathanda ukugxininisa ukuba ixabiso ngokuqinisekileyo lihambelana nomgangatho. Ukuba ungumthengi, kufuneka wazi ukuba izixhobo kunye neenkqubo zonyango ezisetyenziswa kwiimveliso zethu zingcono kunezo zontanga bethu, kwaye umgangatho uqatshelwa kushishino olufanayo. Umzi-mveliso wethu uneworkshop ye-thermosetting, iworkshop ye-thermoplastic, iworkshop ye-welding, iworkshop ye-hardware stamping kunye neworkshop ye-assembly, kwaye izinga leendawo ezenziwe ngokwazo liphezulu njenge-80%. Sikwakhe umzi-mveliso omtsha eWuhu ukuqinisekisa ukubonelelwa kweendawo kuthi, ukuze iiparameter kunye neempawu ezahlukeneyo zobugcisa ezifana nobomi boomatshini, i-Icu, i-Ics, njl. zizinzile kakhulu, kwaye ukufana phakathi kweendawo kuphezulu kakhulu, kwaye ubomi benkonzo yemveliso egqityiweyo bubude kakhulu, nto leyo ethetha ukuba Zingasetyenziswa kwiindawo zoshishino eziphezulu kunye nezibhedlele, apho umgangatho wee-circuit breakers uphezulu kakhulu. Sikwanazo neepatenti zethu zobuchwepheshe kunye neqela le-R&D elinobungcali kakhulu elinobunjineli abangama-30-40 ukuphendula kwiimfuno ezahlukeneyo zabathengi bethu, umjikelo wophuhliso lweemveliso ezintsha uthatha iintsuku ezingama-30-40 kuphela, kule nkqubo, ngaphandle kwemiqathango sikunika iindleko zobugcisa, singazinciphisa kakhulu iindleko zonxibelelwano kunye neendleko zophando kunye nophuhliso. Ukuba kungxamisekile kakhulu, ndingafaka isicelo kubaphathi bam ukuba balungiselele umgca wabathengi, ngokukodwa ukuze udibanise i-MCCB.

A: Siqale ishishini lokuthumela ngaphandle ukususela ekuqaleni konyaka ka-2023. Kuba sineminyaka esi-7 senza i-mccb kwaye sinikezela nge-odm/oem kubathengi bethu baseTshayina. Kunyaka ophelileyo ingeniso yethu yayiyi-250 yezigidi zeerandi.